FS-TV202 Digital Signal Level Meter is an ideal solution that can handle digital TV and maintain the analog spectrum, enable technicians to use it in the most demanding situations with a single, rugged meter.
The new QAM View digital analysis option adds forward path digital signal testing that includes constellation, pre/post FEC BER, MER.
Analog signal measurements are addressed with standard features like RF signal level, full scan, TILT, in-service C/N, A/V, and FCC compliant autotesting.
The FS-TV202 Digital Signal Level Meter is designed to provide ideal solution for cable TV network, to ensure that on-site technicians are fully equipped with the optimal equipment they need to make rapid and accurate analysis.
Specifications
Digital Power (Channel Power) Measurement | |
Signal Types: | QPSK, QAM, COFDM, random waveform |
Accuracy: | ±2dB(0°C~40°C) |
Resolution: | 0.1dB |
QAM Analysis | |
Modulations type: | 16/32/64/128/256QAM DVB-C; ITU-TJ.83-AnnexA/AnnexB |
Symbol Rate: | 1.00Mbps ~7.00Mbps |
Bandwidth: | 6MHz~10MHz |
Frequency tuner: | 50 KHz |
MER measurement range: | 19~38dB ±2dB |
BER Pre/post FEC measurement range: | 10E-2 to 10E-9 |
Frequency: | |
Range: | 5MHz-870MHz |
Accuracy: | ±50ppm (20°C ± 5°C) |
Resolution: | 10kHz |
Level Measurement: | |
Range: | 20dBuV-120dBuV |
Accuracy: | LEVEL (> 35dBuV) ±1.5dB (10°C to 30°C) |
SCAN ±2dB (10°C to 30°C) | |
Resolution: | 0.1dB |
Input Impedance: | 75ohm (unbalanced, BNC or F type connector) |
Wave detection: | peak value |
Channel Scan: | |
Number of Channels: | 200 channels max. |
Scanning speed: | 4 channels / sec |
Zoom: | 1X, 2X, 4X three levels of magnification or full Channel Plan scan |
Memory: | 100 Groups, each group store Max 200 Channels |
Spectrum Analysis: | |
Bandwidth: | Ranging between 10MHz, 25MHz, 50MHz, and full span |
Carrier-Noise Ratio (C/N): | |
Input range: | 70dBuV-105dBuV |
Accuracy: | ±2dB Resolution: 0.1dB |
Digital Channel (Average) Power: | |
Bandwidth: | 0~9MHz |
Center Frequency: | 5MHz to 870MHz |
Digital modulation: | QAM, QPSK |
Tilt measurement: | |
Number of channels: | 5~12 |
Resolution: | 0.1dB |
Trunk Voltage measurement: | |
Input range: | 0-100VAC |
Accuracy: | ±1.5V Resolution 0.1V |
Others: | |
Channel Plan: | |
Number of Channels: | 200 channels max. |
Number of Learned Channel Plan: | 10 max, including 2 user defined |
Audio Output: | Built-in speaker |
Dimensions: | 210mm X 95mm X 50mm |
Gross Weight: | 1.4kg Net Weight: 0.60kg |
Display: | 320 X 240 Color LCD with backlight |
Power Supply: | |
Battery: | 7.2V 1.6AH Ni-MH battery |
Charger: | AC 100V-240V/50Hz |
Working Time: | Average 4-7 hours (full charged battery) |
Charging Time: | 5-10 hrs. |
May not be exactly as pictured. We reserve the right to change the specifications at any time without notice.